Create Windows Bootable Usb From Iso Mac

• Create Bootable Usb From Iso Windows 10
• Iso To Usb Bootable Mac

UUByte ISO Editor deserves a spot in here. It is one of the best tools to create bootable Windows USB from ISO on Mac. In most cases, the free tool (boot camp & unetbootin) just does not work with Windows 10 ISO. If you are a Mac user, then you should definitely check it out.

Use the Restore Disk Image to Drive dialog box to browse for the DMG file with the installation files for Mac OS X Yosemite in this case, and click the OK button to create a bootable USB of the operating system. Now, you'll have to wait a long time. If you've downloaded Windows 10 ISO image, here is how you can create a bootable Windows installer USB on Mac using UNetbootin. Plug a USB drive into your Mac and open Disk Utility. Select your USB drive from the left panel and click on Info button. Note down the device name since we will need that later. In order to Create Bootable USB for Mac on Windows 10 with DiskMaker X 6, first, you have to install macOS High Sierra or lower version of mac on VirtualBox or VMware on Windows 10. Once you installed macOS 10.13 High Sierra follows the below steps and create a Bootable USB for mac on Windows 10.

Ready to install Windows 10 on a PC using UEFI? Use these steps to create a compatible USB bootable media to perform this task.

When it comes the time to install a clean copy of Windows 10, you typically use a USB bootable media to start the computer and proceed with the 'Windows Setup' wizard. However, if you have a device that has a Unified Extensible Firmware Interface (UEFI), instead of the legacy Basic Input/Output System (BIOS), it's important to use the correct media that includes support for the motherboard firmware type.

You can use several methods to create a media to install Windows 10 from USB if you have a newer firmware type. For instance, you can use the Media Creation Tool to download the installation files onto a removable drive with support for both UEFI and legacy BIOS. Or, you can use third-party tools like Rufus that makes it easy to create an installation media with support for UEFI.

Ftp client for mac sierra. In this Windows 10 guide, we'll walk you through the steps to create a USB flash drive that includes UEFI support using the Microsoft Media Creation Tool and Rufus.

• How to create a Windows 10 UEFI boot media using Media Creation Tool
• How to create a Windows 10 UEFI boot media using Rufus tool

How to create a Windows 10 UEFI boot media using Media Creation Tool

If you have a machine using UEFI, you can use the Media Creation Tool to create a bootable USB media to perform a clean installation or in-place upgrade of the Microsoft OS.

To create a bootable media, connect a USB flash drive of at least 8GB of space, and use these steps:

1. Open Windows 10 download page.

2. Under the 'Create Windows 10 installation media' section, click the Download tool now button to save the file.

   © Provided by Windows Central
3. Double-click the MediaCreationToolxxxx.exe file to open the tool.
4. Click the Accept button to agree to the Microsoft terms.

5. Select the Create installation media (USB flash drive, DVD, or ISO file) for another PC option. Mac el capitan iso download.

   © Provided by Windows Central
6. Click the Next button.
7. (Optional) Clear the Use the recommended options for this PC option.

8. Select the correct language, architecture, and edition of Windows 10.

   © Provided by Windows Central

   Quick tip: If you'll be installing Windows 10 on multiple computers running 32-bit and 64-bit architectures, then use the 'Architecture' drop-down menu and select the Both option.

9. Click the Next button.

10. Select the USB flash drive option.

    © Provided by Windows Central
11. Click the Next button

12. Select the removable drive from the list. (If you don't see the drive, click the Refresh drive list option.)

    © Provided by Windows Central
13. Click the Next button.
14. Click the Finish button.

Once you complete the steps, the tool will download the required files and create a bootable USB flash drive with the Windows 10 installation files with support for UEFI and BIOS.

How to create a Windows 10 UEFI boot media using Rufus tool

Alternatively, you can also use Rufus to create an installation media with UEFI support using an existing ISO file. Or you can also use the tool to download the Windows 10 files from the Microsoft servers and then create the bootable flash media.

Creating boot media with Windows 10 ISO

To create a bootable media using an existing Windows 10 ISO file, connect a USB flash drive of at least 8GB of space, and use these steps:

1. Open Rufus download page.

2. Under the 'Download' section, click the latest release and save the file on your device.

   © Provided by Windows Central
3. Double-click the Rufus-x.x.exe file to launch the tool.
4. Under the 'Device' section, select the USB flash drive with at least 8GB of space.
5. Under the 'Boot selection' section, click the Select button on the right side.
6. Select the Windows 10 ISO file from its folder location.
7. Click the Open button.
8. Use the 'Image option' drop-down menu to select the Standard Windows installation option.
9. Use the 'Partition scheme' drop-down menu to select the GPT option.

10. Use the 'Target system' drop-down menu to select the UEFI (non CSM) option.

    © Provided by Windows Central

11. Under the 'Show Advanced drive properties' section, leave the default settings.

    © Provided by Windows Central

12. Under the 'Volume label' field, enter a descriptive name for the drive — for example, 'win10_2004_usb.'

    © Provided by Windows Central
13. Under the 'File system' and 'Cluster size' section, leave the default settings.
14. Click the Show advanced format options button.
15. Select the 'Quick format' and 'Create extended label and icon files' options.
16. Click the Start button.
17. Click the OK button to confirm.
18. Click the Close button.

After you complete the steps, the tool will create a bootable USB flash drive to install Windows 10 on a UEFI device with the image that you provided.

Creating boot media downloading Windows 10 ISO

If a Windows 10 ISO file isn't available, you can use Rufus to download the ISO from the Microsoft servers and create the bootable USB flash media.

To create an installation media, connect a USB flash drive of at least 8GB of space, and use these steps:

1. Open Rufus download page.

2. Under the 'Download' section, click the latest release of the tool to save the file on the computer.

   © Provided by Windows Central
3. Double-click the Rufus-x.x.exe file to launch the tool.
4. Under the 'Device' section, select the USB flash drive with at least 8GB of space.

5. Under the 'Boot selection' section, click the arrow button next to the 'Select' option, and choose the Download option.

   © Provided by Windows Central
6. Click the now available Download button.
7. Use the 'Version' drop-down menu and select Windows 10.
8. Click the Continue button.
9. Select the 20H1 (Build 19041.264 - 2020.05) option to download the Windows 10 May 2020 Update.
10. Click the Continue button.
11. Use the 'Edition' drop-down menu and select the Windows 10 Home/Pro option.
12. Click the Continue button.

13. Use the 'Language' drop-down menu and select your installation language.

    Quick note: If you're in the United States, you should select 'English' instead of 'English International.'

14. Click the Continue button.

15. Use the 'Architecture' drop-down menu and select the 32-bit or 64-bit (recommended).

    Quick tip: You can find out the architecture of your device on Settings >System >About, under Device specifications.

16. Click the Download button.

    © Provided by Windows Central
17. Select a folder location to temporarily download the ISO file from the Microsoft servers.
18. Click the Save button.
19. Use the 'Image option' drop-down menu to select the Standard Windows installation option.
20. Use the 'Partition scheme' drop-down menu to select the GPT option.

21. Use the 'Target system' drop-down menu to select the UEFI (non CSM) option.

    © Provided by Windows Central
22. Under the 'Show Advanced drive properties' section, leave the default settings.
23. Under the 'Volume label' field, enter a descriptive name for the drive — for example, 'win10_2004_usb.'
24. Under the 'File system' and 'Cluster size' section, leave the default settings.
25. Click the Show advanced format options button.
26. Select the 'Quick format' and 'Create extended label and icon files' options.
27. Click the Start button.
28. Click the OK button to confirm.
29. Click the Close button.

Create Bootable Usb From Iso Windows 10

Once you complete the steps, Rufus will run the script to download the Windows 10 ISO file from the Microsoft servers. Then, it'll use that ISO to create a bootable media, which you can then use to install Windows 10 on computers using UEFI.

1. Open Rufus download page.

2. Under the 'Download' section, click the latest release and save the file on your device.

   © Provided by Windows Central
3. Double-click the Rufus-x.x.exe file to launch the tool.
4. Under the 'Device' section, select the USB flash drive with at least 8GB of space.
5. Under the 'Boot selection' section, click the Select button on the right side.
6. Select the Windows 10 ISO file from its folder location.
7. Click the Open button.
8. Use the 'Image option' drop-down menu to select the Standard Windows installation option.
9. Use the 'Partition scheme' drop-down menu to select the GPT option.

10. Use the 'Target system' drop-down menu to select the UEFI (non CSM) option.

    © Provided by Windows Central

11. Under the 'Show Advanced drive properties' section, leave the default settings.

    © Provided by Windows Central

12. Under the 'Volume label' field, enter a descriptive name for the drive — for example, 'win10_2004_usb.'

    © Provided by Windows Central
13. Under the 'File system' and 'Cluster size' section, leave the default settings.
14. Click the Show advanced format options button.
15. Select the 'Quick format' and 'Create extended label and icon files' options.
16. Click the Start button.
17. Click the OK button to confirm.
18. Click the Close button.

After you complete the steps, the tool will create a bootable USB flash drive to install Windows 10 on a UEFI device with the image that you provided.

Creating boot media downloading Windows 10 ISO

If a Windows 10 ISO file isn't available, you can use Rufus to download the ISO from the Microsoft servers and create the bootable USB flash media.

To create an installation media, connect a USB flash drive of at least 8GB of space, and use these steps:

1. Open Rufus download page.

2. Under the 'Download' section, click the latest release of the tool to save the file on the computer.

   © Provided by Windows Central
3. Double-click the Rufus-x.x.exe file to launch the tool.
4. Under the 'Device' section, select the USB flash drive with at least 8GB of space.

5. Under the 'Boot selection' section, click the arrow button next to the 'Select' option, and choose the Download option.

   © Provided by Windows Central
6. Click the now available Download button.
7. Use the 'Version' drop-down menu and select Windows 10.
8. Click the Continue button.
9. Select the 20H1 (Build 19041.264 - 2020.05) option to download the Windows 10 May 2020 Update.
10. Click the Continue button.
11. Use the 'Edition' drop-down menu and select the Windows 10 Home/Pro option.
12. Click the Continue button.

13. Use the 'Language' drop-down menu and select your installation language.

    Quick note: If you're in the United States, you should select 'English' instead of 'English International.'

14. Click the Continue button.

15. Use the 'Architecture' drop-down menu and select the 32-bit or 64-bit (recommended).

    Quick tip: You can find out the architecture of your device on Settings >System >About, under Device specifications.

16. Click the Download button.

    © Provided by Windows Central
17. Select a folder location to temporarily download the ISO file from the Microsoft servers.
18. Click the Save button.
19. Use the 'Image option' drop-down menu to select the Standard Windows installation option.
20. Use the 'Partition scheme' drop-down menu to select the GPT option.

21. Use the 'Target system' drop-down menu to select the UEFI (non CSM) option.

    © Provided by Windows Central
22. Under the 'Show Advanced drive properties' section, leave the default settings.
23. Under the 'Volume label' field, enter a descriptive name for the drive — for example, 'win10_2004_usb.'
24. Under the 'File system' and 'Cluster size' section, leave the default settings.
25. Click the Show advanced format options button.
26. Select the 'Quick format' and 'Create extended label and icon files' options.
27. Click the Start button.
28. Click the OK button to confirm.
29. Click the Close button.

Create Bootable Usb From Iso Windows 10

Once you complete the steps, Rufus will run the script to download the Windows 10 ISO file from the Microsoft servers. Then, it'll use that ISO to create a bootable media, which you can then use to install Windows 10 on computers using UEFI.

When you have the USB bootable media with support for UEFI systems, you can use to start your device to perform an in-place upgrade or clean installation of Windows 10.

More Windows 10 resources

For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:

It does not matter whether you use macOS or Windows 10. It's just a matter of time until your device will refuse to start, which could happen for many reasons, including (and not limited to) file corruption, hardware failure, and buggy update. If the unexpected happens with an Apple computer, you can use a macOS bootable USB with the installation media to repair it.

This is one of the main reasons you should consider making a macOS bootable USB when your device is working properly. However, if none of your devices (MacBook, MacBook Air, MacBook Pro, iMac, Mac Pro, or Mac Mini) aren't working when you need them the most, then you can use a PC to rescue your Apple device. You can use a Windows 10, Windows 8.1, or Windows 7 device to quickly create a USB bootable installation media to reinstall macOS Catalina or Big Sur on your Mac.

In this guide, you'll learn the steps to create a macOS Catalina bootable USB installation on Windows 10, which you can use to reinstall or upgrade the Apple OS.

Requirements

Iso To Usb Bootable Mac

Before proceeding, you'll need the following:

• Broken Mac computer running macOS (version 10.12, 11, or later).
• A trial copy of the TransMac software.
• One high-quality USB flash drive with 16GB of storage.
• Copy of macOS (DMG file).

Create macOS bootable USB installation media

To create a bootable USB drive with macOS, use these steps:

1. Download and install TransMac on the Windows 10 device.

   Quick note: This is a paid software, but it gives you a 15-day trial, which is more than enough time. (If this works for you and you want to support the developer, you can purchase the full version.)

2. Connect the USB flash drive. How to install time machine on mac. (If you have any data on the flash drive, remember to make a backup, as everything on it will be erased.)

3. Right-click the TransMac app and select the Run as administrator option.

4. Click the Run button. (If you're using the trial version, wait 15 seconds.)

5. Right-click the USB flash drive, select the Format Disk for Mac option from the left navigation pane.

   Quick note: You want to do this before creating the bootable media because there is a good chance that the drive was formatted using a Windows device. If this is the case, the chances are that it's using an MBR partition, and the USB drive needs a GPT partition to work on a Mac.

6. Click the Yes button to format the drive on the warning message.

7. Confirm a name for the drive. For example, 'macOS bootable USB.'

8. Click the OK button.

9. Click the Yes button.

10. Click the OK button.

11. Right-click the USB flash drive and select the Restore with Disk Image option from the left navigation pane.

12. Click the Yes button to confirm the erase of the USB flash drive data.

13. Click the browse button on the right.

14. Select the .dmg file with the macOS installation files.

15. Click the Open button.

16. Click the OK button.

17. Click the Yes button.

Once you complete the steps, you can now insert the USB flash drive on your Mac computer to install, reinstall, or upgrade the operating system to the latest macOS version, which can be Sierra, Catalina, Big Sur, or higher.

Create a GPT partition on USB flash drive

If the USB flash drive is not working with TransMac, it could still be a partition problem. In this case, you may need to redo the entire process again. However, this time you should use the following steps to use the Diskpart command-line utility on Windows 10 to create the appropriate GPT partition, and then follow the above instructions.

To create a GPT partition on a removable drive, use these steps:

1. Open Start.

2. Search for Command Prompt, right-click the top result, and select the Run as an administrator option.

3. Type the diskpart command and press Enter.

4. Enter the list disk command to view all drives connected to your computer and press Enter.

5. Type the select disk command followed the number assigned for the USB flash drive (for example, select disk 4), and press Enter.

6. Enter the clean command and press Enter.

7. Type the convert GPT command and press Enter.

8. Enter the create partition primary command and press Enter to complete the process.

Once you formatted the USB flash drive with a GPT partition, you can use the instructions mentioned above to use TransMac to create a bootable media, but this time skip steps No. 5 through 10 and continue on step 11.

After the process completes, which can take up to an hour, connect the USB flash drive and power on your Mac holding down the Option key, select the USB drive to begin installing macOS.

If you have problems creating the bootable media, you can get a USB flash drive that comes with macOS Sierra, El Capitan, Catalina, etc., on it with the link mentioned below. (I haven't tried it personally, but it's worth the try if nothing works.)